dmesg - nothing special
Linux version 6.12.1-gaztuned-xanmod1 (gazotti@localhost) (gcc (Gentoo 14.2.1_p20241116 p3) 14.2.1 20241116, GNU ld (Gentoo 2.43 p3) 2.43.1) #16 SMP PREEMPT Tue Dec 3 13:16:46 -03 2024
KERNEL supported cpus:
Intel GenuineIntel
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000793f7fff] usable
BIOS-e820: [mem 0x00000000793f8000-0x000000007a154fff] reserved
BIOS-e820: [mem 0x000000007a155000-0x000000007a164fff] ACPI data
BIOS-e820: [mem 0x000000007a165000-0x000000007b073fff] ACPI NVS
BIOS-e820: [mem 0x000000007b074000-0x000000007b585fff] reserved
BIOS-e820: [mem 0x000000007b586000-0x000000007b586fff] usable
BIOS-e820: [mem 0x000000007b587000-0x000000007b60cfff] reserved
BIOS-e820: [mem 0x000000007b60d000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
NX (Execute Disable) protection: active
APIC: Static calls initialized
e820: update [mem 0x714c7018-0x714e3e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000003efff] usable
reserve setup_data: [mem 0x000000000003f000-0x000000000003ffff] reserved
reserve setup_data: [mem 0x0000000000040000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x00000000714c7017] usable
reserve setup_data: [mem 0x00000000714c7018-0x00000000714e3e57] usable
reserve setup_data: [mem 0x00000000714e3e58-0x00000000793f7fff] usable
reserve setup_data: [mem 0x00000000793f8000-0x000000007a154fff] reserved
reserve setup_data: [mem 0x000000007a155000-0x000000007a164fff] ACPI data
reserve setup_data: [mem 0x000000007a165000-0x000000007b073fff] ACPI NVS
reserve setup_data: [mem 0x000000007b074000-0x000000007b585fff] reserved
reserve setup_data: [mem 0x000000007b586000-0x000000007b586fff] usable
reserve setup_data: [mem 0x000000007b587000-0x000000007b60cfff] reserved
reserve setup_data: [mem 0x000000007b60d000-0x000000007bffffff] usable
reserve setup_data: [mem 0x000000007c000000-0x000000008fffffff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000047fffffff] usable
efi: EFI v2.4 by American Megatrends
efi: ACPI=0x7aad2000 ACPI 2.0=0x7aad2000 ESRT=0x7b3b1f98 SMBIOS=0x7b3b7000 SMBIOS 3.0=0x7b3b6000
efi: Remove mem30: MMIO range=[0x80000000-0x8fffffff] (256MB) from e820 map
e820: remove [mem 0x80000000-0x8fffffff] reserved
efi: Not removing mem31: MMIO range=[0xfed1c000-0xfed44fff] (164KB) from e820 map
efi: Remove mem32: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
e820: remove [mem 0xff000000-0xffffffff] reserved
SMBIOS 3.0.0 present.
DMI: INTEL /X99-D4, BIOS 5.11 07/22/2024
DMI: Memory slots populated: 2/8
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.422 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x480000 max_arch_pfn = 0x400000000
MTRR map: 6 entries (4 fixed + 2 variable; max 24), built from 10 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
x2apic: enabled by BIOS, switching to x2apic ops
last_pfn = 0x7c000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007b3b1f98 to 0x000000007b3b1fd0.
Using GB pages for direct mapping
Secure boot disabled
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007AAD2000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007AAD20B0 0000E4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007AB059F0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000007AAD2230 0337BE (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000007B072F80 000040
ACPI: APIC 0x000000007AB05B00 00011C (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007AB05C20 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000007AB05C68 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007AB05D08 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000007AB05D48 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x000000007AB060B8 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: HPET 0x000000007AB06100 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MPST 0x000000007AB06138 000DF8 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000007AB06F30 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PCCT 0x000000007AB06FC0 00006E (v01 ALASKA A M I 00000002 INTL 20091013)
ACPI: PMTT 0x000000007AB07030 0000A4 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 0x000000007AB070D8 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000007AB07108 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000007AB08260 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000007AB082A0 0171CF (v02 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: NITR 0x000000007AB1F470 000071 (v02 ALASKA A M I 00000001 INTL 20091013)
ACPI: SSDT 0x000000007AB1F4E8 04E864 (v02 ALASKA SSDT HWP 00004000 INTL 20120913)
ACPI: VFCT 0x000000007AB6DD50 00E884 (v01 ALASKA A M I 00000001 AMD 31504F47)
ACPI: SPCR 0x000000007AB7C5D8 000050 (v01 A M I APTIO V 01072009 AMI. 0005000B)
ACPI: SSDT 0x000000007AB7C628 002652 (v02 ALASKA SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x000000007AB7EC80 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x000000007AB7ECE8 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: DMAR 0x000000007AB7EDF0 0000DC (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: Reserving FACP table memory at [mem 0x7ab059f0-0x7ab05afb]
ACPI: Reserving DSDT table memory at [mem 0x7aad2230-0x7ab059ed]
ACPI: Reserving FACS table memory at [mem 0x7b072f80-0x7b072fbf]
ACPI: Reserving APIC table memory at [mem 0x7ab05b00-0x7ab05c1b]
ACPI: Reserving FPDT table memory at [mem 0x7ab05c20-0x7ab05c63]
ACPI: Reserving FIDT table memory at [mem 0x7ab05c68-0x7ab05d03]
ACPI: Reserving MCFG table memory at [mem 0x7ab05d08-0x7ab05d43]
ACPI: Reserving SSDT table memory at [mem 0x7ab05d48-0x7ab060b4]
ACPI: Reserving UEFI table memory at [mem 0x7ab060b8-0x7ab060f9]
ACPI: Reserving HPET table memory at [mem 0x7ab06100-0x7ab06137]
ACPI: Reserving MPST table memory at [mem 0x7ab06138-0x7ab06f2f]
ACPI: Reserving MSCT table memory at [mem 0x7ab06f30-0x7ab06fbf]
ACPI: Reserving PCCT table memory at [mem 0x7ab06fc0-0x7ab0702d]
ACPI: Reserving PMTT table memory at [mem 0x7ab07030-0x7ab070d3]
ACPI: Reserving SLIT table memory at [mem 0x7ab070d8-0x7ab07104]
ACPI: Reserving SRAT table memory at [mem 0x7ab07108-0x7ab0825f]
ACPI: Reserving WDDT table memory at [mem 0x7ab08260-0x7ab0829f]
ACPI: Reserving SSDT table memory at [mem 0x7ab082a0-0x7ab1f46e]
ACPI: Reserving NITR table memory at [mem 0x7ab1f470-0x7ab1f4e0]
ACPI: Reserving SSDT table memory at [mem 0x7ab1f4e8-0x7ab6dd4b]
ACPI: Reserving VFCT table memory at [mem 0x7ab6dd50-0x7ab7c5d3]
ACPI: Reserving SPCR table memory at [mem 0x7ab7c5d8-0x7ab7c627]
ACPI: Reserving SSDT table memory at [mem 0x7ab7c628-0x7ab7ec79]
ACPI: Reserving SSDT table memory at [mem 0x7ab7ec80-0x7ab7ece3]
ACPI: Reserving PRAD table memory at [mem 0x7ab7ece8-0x7ab7ede9]
ACPI: Reserving DMAR table memory at [mem 0x7ab7edf0-0x7ab7eecb]
APIC: Switched APIC routing to: cluster x2apic
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x47fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00001000-0x7fffffff] + [mem 0x100000000-0x47fffffff] -> [mem 0x00001000-0x47fffffff]
NODE_DATA(0) allocated [mem 0x47ffdca80-0x47fffefff]
cma: Reserved 1956 MiB at 0x0000000100000000 on node -1
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000003efff]
node 0: [mem 0x0000000000040000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000793f7fff]
node 0: [mem 0x000000007b586000-0x000000007b586fff]
node 0: [mem 0x000000007b60d000-0x000000007bffffff]
node 0: [mem 0x0000000100000000-0x000000047fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 8590 pages in unavailable ranges
On node 0, zone DMA32: 134 pages in unavailable ranges
On node 0, zone Normal: 16384 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
ACPI: SPCR: SPCR table version 1
ACPI: SPCR: console: uart,io,0x3f8,115200
TSC deadline timer available
CPU topo: Max. logical packages: 1
CPU topo: Max. logical dies: 1
CPU topo: Max. dies per package: 1
CPU topo: Max. threads per core: 1
CPU topo: Num. cores per package: 14
CPU topo: Num. threads per package: 14
CPU topo: Allowing 14 present CPUs plus 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x714c7000-0x714c7fff]
PM: hibernation: Registered nosave memory: [mem 0x714e3000-0x714e3fff]
PM: hibernation: Registered nosave memory: [mem 0x793f8000-0x7a154fff]
PM: hibernation: Registered nosave memory: [mem 0x7a155000-0x7a164fff]
PM: hibernation: Registered nosave memory: [mem 0x7a165000-0x7b073fff]
PM: hibernation: Registered nosave memory: [mem 0x7b074000-0x7b585fff]
PM: hibernation: Registered nosave memory: [mem 0x7b587000-0x7b60cfff]
PM: hibernation: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
PM: hibernation: Registered nosave memory: [mem 0x80000000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[mem 0x80000000-0xfed1bfff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3821924579961850 ns
setup_percpu: NR_CPUS:32 nr_cpumask_bits:14 nr_cpu_ids:14 nr_node_ids:1
percpu: Embedded 80 pages/cpu s202840 r8192 d116648 u524288
pcpu-alloc: s202840 r8192 d116648 u524288 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
pcpu-alloc: [0] 08 09 10 11 [0] 12 13 -- --
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.1-gaztuned-xanmod1", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 4169098
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 16.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=14, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 61299 entries in 240 pages
ftrace: allocated 240 pages with 4 groups
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=14.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 50 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=14
RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=14.
RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=14.
RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=14.
NR_IRQS: 4352, nr_irqs: 944, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: legacy console [tty0] enabled
ACPI: Core revision 20240827
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap 8d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000007b3e2000 end: 0x0000007b3f2fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2283a1eeb39, max_idle_ns: 440795217409 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.84 BogoMIPS (lpj=4788844)
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
process: using mwait in idle threads
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
TAA: Mitigation: Clear CPU buffers
MMIO Stale Data: Mitigation: Clear CPU buffers
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Freeing SMP alternatives memory: 40K
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2680 v4 @ 2.40GHz (family: 0x6, model: 0x4f, stepping: 0x1)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
signal: max sigframe size: 1776
Estimated ratio of average max frequency by base frequency (times 1024): 1280
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 800.
Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13
smp: Brought up 1 node, 14 CPUs
smpboot: Total of 14 processors activated (67043.81 BogoMIPS)
Memory: 14244984K/16676392K available (24576K kernel code, 3150K rwdata, 12216K rodata, 4164K init, 2736K bss, 405708K reserved, 2002944K cma-reserved)
devtmpfs: initialized
ACPI: PM: Registering ACPI NVS region [mem 0x7a165000-0x7b073fff] (15790080 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
*************************************************************
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
** **
** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
** **
** This means that this kernel is built to expose internal **
** IOMMU data structures, which may compromise security on **
** your system. **
** **
** If you see this message and you are not debugging the **
** kernel, report this immediately to your vendor! **
** **
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
*************************************************************
PM: RTC time: 17:09:48, date: 2024-12-07
NET: Registered PF_NETLINK/PF_ROUTE protocol family
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1733591388.054:1): state=initialized audit_enabled=0 res=1
i2c-core: driver [dummy] registered
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
dca service started, version 1.12.1
PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff]
PCI: Using configuration type 1 for base access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
cryptd: max_cpu_qlen set to 1000
fbcon: Taking over console
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A03:03: _OSC: platform does not support [LTR DPC]
acpi PNP0A03:03: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0d.0: [8086:6fe8] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0d.1: [8086:6fe9] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0d.2: [8086:6fea] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0d.3: [8086:6feb] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0d.4: [8086:6fec] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0d.5: [8086:6fed] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0f.2: [8086:6ffa] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0f.3: [8086:6ffb] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint
pci 0000:ff:12.4: [8086:6f60] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:12.5: [8086:6f38] type 00 class 0x110100 conventional PCI endpoint
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:16.1: [8086:6f79] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:16.2: [8086:6f6a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:16.3: [8086:6f6b] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:17.1: [8086:6fd1] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:17.2: [8086:6fd2] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:17.3: [8086:6fd3] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0x383c00000000-0x383e001fffff 64bit pref]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020 PCIe Root Complex Integrated Endpoint
pci 0000:00:05.4: BAR 0 [mem 0xfbf03000-0xfbf03fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 PCIe Root Complex Integrated Endpoint
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 conventional PCI endpoint
pci 0000:00:14.0: BAR 0 [mem 0x383ffff00000-0x383ffff0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 conventional PCI endpoint
pci 0000:00:1a.0: BAR 0 [mem 0xfbf02000-0xfbf023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
pci 0000:00:1b.0: BAR 0 [mem 0x383ffff10000-0x383ffff13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 PCIe Root Port
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:8d1a] type 01 class 0x060400 PCIe Root Port
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 conventional PCI endpoint
pci 0000:00:1d.0: BAR 0 [mem 0xfbf01000-0xfbf013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100 conventional PCI endpoint
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 conventional PCI endpoint
pci 0000:00:1f.2: BAR 0 [io 0xf050-0xf057]
pci 0000:00:1f.2: BAR 1 [io 0xf040-0xf043]
pci 0000:00:1f.2: BAR 2 [io 0xf030-0xf037]
pci 0000:00:1f.2: BAR 3 [io 0xf020-0xf023]
pci 0000:00:1f.2: BAR 4 [io 0xf000-0xf01f]
pci 0000:00:1f.2: BAR 5 [mem 0xfbf00000-0xfbf007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 conventional PCI endpoint
pci 0000:00:1f.3: BAR 0 [mem 0x383ffff15000-0x383ffff150ff 64bit]
pci 0000:00:1f.3: BAR 4 [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint
pci 0000:04:00.0: BAR 0 [mem 0x383c00000000-0x383dffffffff 64bit pref]
pci 0000:04:00.0: BAR 2 [mem 0x383e00000000-0x383e001fffff 64bit pref]
pci 0000:04:00.0: BAR 4 [io 0xe000-0xe0ff]
pci 0000:04:00.0: BAR 5 [mem 0xfbe00000-0xfbe3ffff]
pci 0000:04:00.0: ROM [mem 0xfbe40000-0xfbe5ffff pref]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint
pci 0000:04:00.1: BAR 0 [mem 0xfbe60000-0xfbe63fff 64bit]
pci 0000:04:00.1: enabling Extended Tags
pci 0000:04:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
pci 0000:06:00.0: BAR 0 [io 0xd000-0xd0ff]
pci 0000:06:00.0: BAR 2 [mem 0xfbd04000-0xfbd04fff 64bit]
pci 0000:06:00.0: BAR 4 [mem 0xfbd00000-0xfbd03fff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci_bus 0000:00: on NUMA node 0
pci 0000:00:01.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128
pci 0000:00:01.1: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128
pci 0000:00:02.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128
pci 0000:00:03.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 128
pci 0000:04:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0000:04:00.1: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0000:00:1c.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
pci 0000:00:1c.5: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
pci 0000:06:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKA disabled
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKB disabled
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKC disabled
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKD disabled
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
EDAC DEBUG: edac_mc_sysfs_init: device mc created
efivars: Registered efivars operations
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
e820: reserve RAM buffer [mem 0x714c7018-0x73ffffff]
e820: reserve RAM buffer [mem 0x793f8000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b587000-0x7bffffff]
pci 0000:04:00.0: vgaarb: setting as boot VGA device
pci 0000:04:00.0: vgaarb: bridge control possible
pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
pnp: PnP ACPI init
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
pnp 00:05: [dma 0 disabled]
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0x383c00000000-0x383e001fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: resource 8 [mem 0x380000000000-0x383fffffffff window]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 2 [mem 0x383c00000000-0x383e001fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28]
pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes
pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000006d4c7000-0x00000000714c7000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-14 Joules
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
fuse: init (API version 7.41)
NET: Registered PF_ALG protocol family
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
ledtrig-cpu: registered to indicate activity on CPUs
pcieport 0000:00:01.0: PME: Signaling with IRQ 25
pcieport 0000:00:01.0: AER: enabled with IRQ 25
pcieport 0000:00:01.1: PME: Signaling with IRQ 26
pcieport 0000:00:01.1: AER: enabled with IRQ 26
pcieport 0000:00:02.0: PME: Signaling with IRQ 28
pcieport 0000:00:02.0: AER: enabled with IRQ 28
pcieport 0000:00:03.0: PME: Signaling with IRQ 30
pcieport 0000:00:03.0: AER: enabled with IRQ 30
pcieport 0000:00:1c.0: PME: Signaling with IRQ 31
pcieport 0000:00:1c.5: PME: Signaling with IRQ 32
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
ioatdma: Intel(R) QuickData Technology Driver 5.00
idxd driver failed to load without MOVDIR64B.
Non-volatile memory driver v1.3
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
loop: module loaded
zram: Added device: zram0
i2c-core: driver [at24] registered
i2c-core: driver [ee1004] registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode
ahci 0000:00:1f.2: 3/6 ports implemented (port mask 0x15)
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00100 irq 33 lpm-pol 4
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00200 irq 33 lpm-pol 4
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00300 irq 33 lpm-pol 4
ata6: DUMMY
ACPI: bus type drm_connector registered
[drm] amdgpu kernel modesetting enabled.
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:04:00.0: enabling device (0106 -> 0107)
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF).
[drm] register mmio base: 0xFBE00000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: xxx-xxx-xxx
Loading firmware: amdgpu/polaris10_sdma.bin
Loading firmware: amdgpu/polaris10_sdma1.bin
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:04:00.0: vgaarb: deactivate vga console
amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
Loading firmware: amdgpu/polaris10_mc.bin
amdgpu 0000:04:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
amdgpu 0000:04:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=8192M
[drm] RAM width 256bits GDDR5
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 7944M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400580000).
Loading firmware: amdgpu/polaris10_pfp_2.bin
Loading firmware: amdgpu/polaris10_me_2.bin
Loading firmware: amdgpu/polaris10_ce_2.bin
[drm] Chained IB support enabled!
Loading firmware: amdgpu/polaris10_rlc.bin
Loading firmware: amdgpu/polaris10_mec_2.bin
Loading firmware: amdgpu/polaris10_mec2_2.bin
amdgpu: hwmgr_sw_init smu backed is polaris10_smu
Loading firmware: amdgpu/polaris10_uvd.bin
[drm] Found UVD firmware Version: 1.130 Family ID: 16
Loading firmware: amdgpu/polaris10_vce.bin
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
Loading firmware: amdgpu/polaris10_k_smc.bin
[drm] Display Core v3.2.301 initialized on DCE 11.2
i2c i2c-0: adapter [AMDGPU DM i2c hw bus 0] registered
i2c i2c-1: adapter [AMDGPU DM i2c hw bus 1] registered
i2c i2c-2: adapter [AMDGPU DM i2c hw bus 2] registered
i2c i2c-3: adapter [AMDGPU DM i2c hw bus 3] registered
i2c i2c-4: adapter [AMDGPU DM i2c hw bus 4] registered
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x6fdf:0x1002]
kfd kfd: amdgpu: added device 1002:6fdf
amdgpu 0000:04:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32
amdgpu 0000:04:00.0: amdgpu: Using BACO for runtime pm
i2c i2c-5: adapter [AMDGPU DM aux hw bus 0] registered
i2c i2c-6: adapter [AMDGPU DM aux hw bus 1] registered
i2c i2c-7: adapter [AMDGPU DM aux hw bus 2] registered
[drm] Initialized amdgpu 3.59.0 for 0000:04:00.0 on minor 0
fbcon: amdgpudrmfb (fb0) is primary device
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
Console: switching to colour frame buffer device 200x56
ata5.00: ATA-10: MKNSSDS2240GB-LT, T0818A0, max UDMA/133
ata5.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata3.00: ATA-7: WDC WD1600AAJS-75PSA0, 05.06H05, max UDMA/133
ata3.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: Features: Dev-Sleep
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD1600AAJS-7 6H05 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer device
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
ata5.00: configured for UDMA/133
r8169 0000:06:00.0 eth0: RTL8168h/8111h, 22:06:4d:07:06:0c, XID 541, IRQ 35
r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf02000
scsi 4:0:0:0: Direct-Access ATA MKNSSDS2240GB-LT 8A0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.12.1-gaztuned-xanmod1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
ehci-pci 0000:00:1d.0: EHCI Host Controller
xhci_hcd 0000:00:14.0: xHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.12.1-gaztuned-xanmod1 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf01000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 15 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.12.1-gaztuned-xanmod1 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: 6 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
mousedev: PS/2 mouse device common for all mice
usb usb3: Manufacturer: Linux 6.12.1-gaztuned-xanmod1 ehci_hcd
rtc_cmos 00:00: RTC can wake from S4
usb usb3: SerialNumber: 0000:00:1d.0
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
rtc_cmos 00:00: registered as rtc0
hub 3-0:1.0: USB hub found
rtc_cmos 00:00: setting system clock to 2024-12-07T17:09:48 UTC (1733591388)
hub 3-0:1.0: 2 ports detected
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
i2c-core: driver [smbus_alert] registered
i2c_dev: i2c /dev entries driver
i2c_dev: adapter [AMDGPU DM i2c hw bus 0] registered as minor 0
i2c_dev: adapter [AMDGPU DM i2c hw bus 1] registered as minor 1
i2c_dev: adapter [AMDGPU DM i2c hw bus 2] registered as minor 2
i2c_dev: adapter [AMDGPU DM i2c hw bus 3] registered as minor 3
i2c_dev: adapter [AMDGPU DM i2c hw bus 4] registered as minor 4
i2c_dev: adapter [AMDGPU DM aux hw bus 0] registered as minor 5
i2c_dev: adapter [AMDGPU DM aux hw bus 1] registered as minor 6
i2c_dev: adapter [AMDGPU DM aux hw bus 2] registered as minor 7
sdb: sdb1 sdb2 sdb3
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
sd 2:0:0:0: [sdb] Attached SCSI disk
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c_dev: adapter [SMBus I801 adapter at 0580] registered as minor 8
i2c i2c-8: adapter [SMBus I801 adapter at 0580] registered
sd 0:0:0:0: will avoid using SCT for temperature monitoring
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: Probing failed, no device found
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: Probing failed, no device found
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: Probing failed, no device found
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: Probing failed, no device found
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: Probing failed, no device found
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: Probing failed, no device found
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: Probing failed, no device found
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: Probing failed, no device found
i2c-core: driver [jc42] registered
i2c i2c-8: found normal entry for adapter 8, addr 0x18
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: found normal entry for adapter 8, addr 0x19
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: found normal entry for adapter 8, addr 0x1a
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: found normal entry for adapter 8, addr 0x1b
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: found normal entry for adapter 8, addr 0x1c
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: found normal entry for adapter 8, addr 0x1d
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: found normal entry for adapter 8, addr 0x1e
i801_smbus 0000:00:1f.3: No response
i2c i2c-8: found normal entry for adapter 8, addr 0x1f
i801_smbus 0000:00:1f.3: No response
nct6775: Found NCT6779D or compatible chip at 0x2e:0xa20
i2c-core: driver [nct6775-i2c] registered
iTCO_wdt iTCO_wdt.0.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
iTCO_vendor_support: vendor-support=0
EDAC DEBUG: i5400_init: MC:
EDAC DEBUG: sbridge_init:
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC DEBUG: sbridge_get_onedevice: Detected 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC DEBUG: sbridge_probe: Registering MC#0 (1 of 2)
EDAC DEBUG: sbridge_register_mci: MC: mci = 00000000fc017253, dev = 000000008c72db52
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.18.0 with dev = 00000000533d0433
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.0 with dev = 00000000bd8eb65f
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.1 with dev = 0000000041073930
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.2 with dev = 000000004e9d4343
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.3 with dev = 0000000078097bf8
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.15.4 with dev = 0000000055aadf8c
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.15.5 with dev = 000000004c96ed95
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.7 with dev = 00000000ca693f8c
EDAC DEBUG: get_dimm_config: mc#0: Node ID: 0, source ID: 0
EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
EDAC DEBUG: get_dimm_config: Lockstep is disabled
EDAC DEBUG: get_dimm_config: address map is on open page mode
EDAC DEBUG: __populate_dimms: Memory is registered
EDAC DEBUG: __populate_dimms: mc#0: ha 0 channel 1, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 2, row: 0x8000, col: 0x400
EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB (0x000000007fffffff)
EDAC DEBUG: get_memory_layout: TOHM: 18.000 GB (0x000000047fffffff)
EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 18.000 GB (0x0000000480000000) Interleave: [8:6]XOR[18:16] reg=0x040047c1
EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
EDAC DEBUG: get_memory_layout: TAD#0: up to 2.000 GB (0x0000000080000000), socket interleave 2, memory interleave 1, TGT: 1, 0, 0, 0, reg=0x0001f401
EDAC DEBUG: get_memory_layout: TAD#1: up to 18.000 GB (0x0000000480000000), socket interleave 2, memory interleave 1, TGT: 1, 0, 0, 0, reg=0x0011f401
EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0: 0.000 GB (0x0000000000000000), reg=0x00000000
EDAC DEBUG: get_memory_layout: TAD CH#1, offset #1: 2.000 GB (0x0000000080000000), reg=0x00000800
EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 2, reg=0x9000001e
EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#1, offset 0.000 GB (0x0000000000000000), tgt: 1, reg=0x00100000
EDAC DEBUG: edac_mc_add_mc_with_groups:
EDAC DEBUG: edac_create_sysfs_mci_device: device mc0 created
EDAC DEBUG: edac_create_dimm_object: device dimm3 created at location channel 1 slot 0
EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC DEBUG: sbridge_probe: Registering MC#1 (2 of 2)
EDAC DEBUG: sbridge_register_mci: MC: mci = 00000000c3fbcc10, dev = 00000000d2b3de90
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.18.4 with dev = 0000000069768d57
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.22.0 with dev = 000000002fe88de3
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.22.1 with dev = 00000000a527a227
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.22.2 with dev = 0000000028e684eb
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.22.3 with dev = 0000000000455684
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.15.4 with dev = 0000000055aadf8c
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.15.5 with dev = 000000004c96ed95
EDAC DEBUG: broadwell_mci_bind_devs: Associated PCI ff.19.7 with dev = 00000000ca693f8c
EDAC DEBUG: get_dimm_config: mc#1: Node ID: 0, source ID: 0
EDAC DEBUG: get_dimm_config: Memory mirroring is disabled
EDAC DEBUG: get_dimm_config: Lockstep is disabled
EDAC DEBUG: get_dimm_config: address map is on open page mode
EDAC DEBUG: __populate_dimms: Memory is registered
EDAC DEBUG: __populate_dimms: mc#1: ha 1 channel 1, dimm 0, 8192 MiB (2097152 pages) bank: 16, rank: 2, row: 0x8000, col: 0x400
EDAC DEBUG: get_memory_layout: TOLM: 2.000 GB (0x000000007fffffff)
EDAC DEBUG: get_memory_layout: TOHM: 18.000 GB (0x000000047fffffff)
EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 18.000 GB (0x0000000480000000) Interleave: [8:6]XOR[18:16] reg=0x040047c1
EDAC DEBUG: get_memory_layout: SAD#0, interleave #0: 0
EDAC DEBUG: get_memory_layout: TAD#0: up to 2.000 GB (0x0000000080000000), socket interleave 2, memory interleave 1, TGT: 1, 0, 0, 0, reg=0x0001f401
EDAC DEBUG: get_memory_layout: TAD#1: up to 18.000 GB (0x0000000480000000), socket interleave 2, memory interleave 1, TGT: 1, 0, 0, 0, reg=0x0011f401
EDAC DEBUG: get_memory_layout: TAD CH#1, offset #0: 0.000 GB (0x0000000000000000), reg=0x00000000
EDAC DEBUG: get_memory_layout: TAD CH#1, offset #1: 2.000 GB (0x0000000080000000), reg=0x00000800
EDAC DEBUG: get_memory_layout: CH#1 RIR#0, limit: 7.999 GB (0x00000001fff00000), way: 2, reg=0x9000001e
EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#0, offset 0.000 GB (0x0000000000000000), tgt: 0, reg=0x00000000
EDAC DEBUG: get_memory_layout: CH#1 RIR#0 INTL#1, offset 0.000 GB (0x0000000000000000), tgt: 1, reg=0x00100000
EDAC DEBUG: edac_mc_add_mc_with_groups:
EDAC DEBUG: edac_create_sysfs_mci_device: device mc1 created
EDAC DEBUG: edac_create_dimm_object: device dimm3 created at location channel 1 slot 0
EDAC MC1: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#1: DEV 0000:ff:12.4 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
intel_pstate: HWP not enabled
intel_pstate: Intel P-state driver initializing
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:04:00.1: enabling device (0100 -> 0102)
snd_hda_intel 0000:04:00.1: Force to non-snoop mode
usbcore: registered new interface driver snd-usb-audio
NET: Registered PF_INET6 protocol family
usb 1-1: new high-speed USB device number 2 using ehci-pci
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
microcode: Current revision: 0x0b000038
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input2
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input3
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input4
resctrl: L3 allocation detected
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input5
resctrl: L3 monitoring detected
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input6
usb 2-7: new low-speed USB device number 2 using xhci_hcd
IPI shorthand broadcast: enabled
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input7
AES CTR mode by8 optimization enabled
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
usb 3-1: new high-speed USB device number 2 using ehci-pci
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
sched_clock: Marking stable (996001918, 1057414)->(1003207606, -6148274)
registered taskstats version 1
Loading compiled-in X.509 certificates
Demotion targets for Node 0: null
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
PM: Magic number: 4:981:187
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
acpi device:1a8: hash matches
acpi device:46: hash matches
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
RAS: Correctable Errors collector initialized.
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
clk: Disabling unused clocks
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
PM: genpd: Disabling unused power domains
ALSA device list:
#0: HDA Intel PCH at 0x383ffff10000 irq 44
#1: HDA ATI HDMI at 0xfbe60000 irq 46
EXT4-fs (sdc1): mounted filesystem 29c87474-5035-40ab-9936-24da755beb75 ro with ordered data mode. Quota mode: disabled.
VFS: Mounted root (ext4 filesystem) readonly on device 8:33.
devtmpfs: mounted
Freeing unused kernel image (initmem) memory: 4164K
Write protecting the kernel read-only data: 36864k
Freeing unused kernel image (rodata/data gap) memory: 72K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
x86/mm: Checked W+X mappings: passed, no W+X pages found.
usb 2-7: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.04
Run /sbin/init as init process
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
with arguments:
/sbin/init
usb 2-7: Product: Microsoft Basic Optical Mouse v2.0
usb 2-7: Manufacturer: Microsoft
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-6.12.1-gaztuned-xanmod1
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:045E:00CB.0001/input/input13
hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:14.0-7/input0
usb 3-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 2-8: new low-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2394.454 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c0783fd, max_idle_ns: 440795301468 ns
clocksource: Switched to clocksource tsc
usb 2-8: New USB device found, idVendor=c0f4, idProduct=02f5, bcdDevice= 1.10
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: Usb KeyBoard
usb 2-8: Manufacturer: Usb KeyBoard
input: Usb KeyBoard Usb KeyBoard as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:C0F4:02F5.0002/input/input14
hid-generic 0003:C0F4:02F5.0002: input,hidraw1: USB HID v1.10 Keyboard [Usb KeyBoard Usb KeyBoard] on usb-0000:00:14.0-8/input0
input: Usb KeyBoard Usb KeyBoard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:C0F4:02F5.0003/input/input15
input: Usb KeyBoard Usb KeyBoard System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:C0F4:02F5.0003/input/input16
hid-generic 0003:C0F4:02F5.0003: input,hidraw2: USB HID v1.10 Device [Usb KeyBoard Usb KeyBoard] on usb-0000:00:14.0-8/input1
r8169 0000:06:00.0 enp6s0: renamed from eth0
intel_rapl_common: Found RAPL domain package
EXT4-fs (sdc1): re-mounted 29c87474-5035-40ab-9936-24da755beb75 r/w. Quota mode: disabled.
EXT4-fs (sdc1): re-mounted 29c87474-5035-40ab-9936-24da755beb75 r/w. Quota mode: disabled.
Adding 20479996k swap on /dev/sda2. Priority:-2 extents:1 across:20479996k
EXT4-fs (sda1): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
EXT4-fs (sda1): mounted filesystem a3184b03-a655-4a05-84a3-c5aca3dc891b r/w with ordered data mode. Quota mode: disabled.
zram0: detected capacity change from 0 to 20971520
EXT4-fs (zram0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (zram0): mounted filesystem 9a6c5b81-36c5-4dce-930e-dd2ced91dc72 r/w without journal. Quota mode: disabled.
zram: Added device: zram1
zram1: detected capacity change from 0 to 8585216
Adding 4292604k swap on /dev/zram1. Priority:16383 extents:1 across:4292604k SSDsc
Loading firmware: rtl_nic/rtl8168h-2.fw
Generic FE-GE Realtek PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
r8169 0000:06:00.0 enp6s0: Link is Down
r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
r8169 0000:06:00.0 enp6s0: Link is Down
Generic FE-GE Realtek PHY r8169-0-600:00: Downshift occurred from negotiated speed 1Gbps to actual speed 100Mbps, check cabling!
r8169 0000:06:00.0 enp6s0: Link is Up - 100Mbps/Full (downshifted) - flow control rx/tx
amdgpu 0000:04:00.0: amdgpu: Disabling VM faults because of PRT request!
r8169 0000:06:00.0 enp6s0: Link is Down
r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
r8169 0000:06:00.0 enp6s0: Link is Down
r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
r8169 0000:06:00.0 enp6s0: Link is Down
r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
r8169 0000:06:00.0 enp6s0: Link is Down
r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
r8169 0000:06:00.0 enp6s0: Link is Down
r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
r8169 0000:06:00.0 enp6s0: Link is Down
Generic FE-GE Realtek PHY r8169-0-600:00: Downshift occurred from negotiated speed 1Gbps to actual speed 100Mbps, check cabling!
r8169 0000:06:00.0 enp6s0: Link is Up - 100Mbps/Full (downshifted) - flow control rx/tx